Hold the screen with the suction cup.

Gently pull up while holding the back cover with the dual tablet-opening tool, releasing the plastic latches located around it.

Once opened, the screen continues linked by the data flex and the power cables.

Peel off the stickers that cover the connectors on the display.

Disconnect the data flexes from the motherboard (the screen is still attached to the board by the 2 red and black power cables, which are soldered).

You will need an appropriate soldering iron to desolder the GPS antenna.

Peel off the antenna from the housing.

Unsolder the coaxial cable from the base plate, applying heat with the tip of the soldering iron while gently pulling the cable.