To begin with we must remove the twenty Torx screws (T5) and with the help of a flat tool we will disengage it.
Step 2 We disconnected battery
Remove the adhesive that is above the connector and disconnect the battery for safety.
Step 3 Components
Remove the adhesives and components of the motherboard with the most appropriate tools available.
Step 4 Components
Remove the Phillips screw (PH # 00) that holds the support of the side buttons, and disconnect the rest of the components of the motherboard.
Step 5 Motherboard
We extract the six Phillips screws (PH # 00) that hold the base plate and we can lift it.
Step 6 Components
We remove the front camera, the microphone and the light sensor.
Step 7 Components of the LTE module
We disconnect everything that is connected in the LTE module.
Step 8 Speaker
Remove the three Phillips screws (PH # 00) that hold the speaker and remove it.
Step 9 Antenna and LTE module
We take off the antenna very carefully, they are very delicate, we remove the four Phillips screws (PH # 00) that hold the LTE module and remove it.
Step 10 Drums
We take off the battery helping us with a fine tool.
Step 11 Antenna
Take off the antenna with excessive care as it is very delicate.
Step 12 Adhesives
Take off the remaining stickers on the tablet's chassis.
Step 13 Chassis
We extract the eleven Phillips screws (PH # 00) that hold the chassis of the tablet and we can lift it.
Step 14 LCD screen
To finish, we will only have to take off the LCD screen that we have to replace, for this we will use a tool that is fine enough.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.