We start by removing the back cover. For this, we will leverage with an opening tool until unhook it.

With an opening tool or directly with your hands, we will disengage the battery.

Remove the ten Phillips screws (PH # 00) that hold the intermediate housing to the chassis and then unhook it.

To be able to remove the base plate, first take off the flex of side push buttons and then disconnect the components.

We remove the four Phillips screws (PH # 00) that hold the plate to the chassis and then we unlock it. Before removing it, we will have to disconnect from the bottom, the interconnection flex and the coaxial cable.

We only need to disconnect the cameras and desolder the flex of lateral push buttons.