First of all we must extract the tray of the cards.

We remove the trims from the back shell by using a tool that is thin enough.

Remove the six Phillips screws (PH # 00) that hold the housing, and with the help of a tool we uncouple all edges of the housing.

Remove the 4 Phillips screws (PH # 00) that hold the lower antenna module.

We take off the battery.

We disconnect the coaxial cable and the flex from the screen that are connected to the auxiliary plate.

Apply heat to the screen to soften the adhesives, take off and remove the auxiliary plate as it covers a hole through which one of the flexes of the screen has to exit. To take off the screen we have used a very thin metal tool to open some gap, and then we have introduced a somewhat thicker tool to finish off the screen.