We will start by removing the back cover, prying with an opening tool to release the notches that hold it.
Step 2
Remove the sixteen Phillips screws (PH # 00) that hold the intermediate housing to the chassis and then, prying it with a tool, we will disengage it.
Step 3 Disconnect components
In this step we disconnect the battery, the push button flex, the LCD display flex, the interconnection flex, the antenna coaxial cable and the digitizer flex.
Step 4 Removing the motherboard
Now we remove the Phillips screw (PH # 00) that holds the motherboard to the chassis and we disengage it.
Step 5
In this step we take off the battery and the display flex.
Step 6 Remove screen
We will heat the screen at about 60ºC for about a minute to soften the adhesive.
While it is hot, introduce a barb or other flat tool between it and the frame. Sliding it around the contour we will take it off.
Step 7 Front button LEDs
To finish, we remove the auxiliary plate and detach the flex from the chassis.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.