We must start by applying heat to the back cover, then introduce a thin tool to go unpinning all the edges of the casing.

We disconnected the interconnection flex between the fingerprint reader and the motherboard.

Remove the three Phillips screws (PH # 00) that hold the shield that protects the battery connector and the interconnection flex. We remove the shielding and disconnect the battery to avoid possible damage.

Remove the eight Phillips screws (PH # 00) and unhook the shield covering the screen connector and the intermediate housing.

We take off the adhesive that is above the connector, and we can now disconnect and remove the front camera that we are going to replace.