We start by removing the SIM / SD tray to be able to remove the back cover. Then we introduce a tool between it, making lever movements to disengage it.

We disconnected the fingerprint sensor to be able to move the back cover away. Now we remove the eight Phillips screws (PH # 00) that hold the shield of the plate and we disengage it.

We disconnect the components of the motherboard.

We remove the Phillips screw (PH # 00) that holds the motherboard and unlock it. Before removing it, we will disconnect the coaxial antenna cable.

In this step we take off the battery and the flex cables from the screen.

We heat the screen at about 65 ° C for about a minute to soften the adhesive. With the hot screen, we introduce a flat tool between it and the frame to detach it by sliding it around the contour.