We start by removing the back cover. For this we will first have to remove the two Pentalobe 0.8 screws (TS1) that we found in the lower part and also remove the SIM / SD tray

We introduce a flat tool between it and the frame to separate them by prying around the contour.

To detach the battery we will pull the tabs to remove the adhesive. After that, we only need to disconnect it and disengage it.

We disconnect the flex from the screen and take it off the chassis. Then heat it to about 70 ° C for about two minutes to soften the adhesive.

With the hot screen, we introduce a flat tool between it and the frame. Sliding it around the contour, we will take off the adhesive.

We can already take off the flex of the chassis.