Wiko Robby - Motherboard

Guide with all the necessary steps so that you can change the Wiko Robby motherboard yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Specifications

Dimensions: 79.1 x 155 x 10 mm

Weight : 185 g

SoC: Mediatek MT6580

Processor: ARM Cortex-47, 1300 MHz, Number of cores: 4

Graphic processor: ARM Mali-400 MP1, Number of cores: 1

RAM: 1 GB

Internal memory: 16 GB

Memory cards: microSD, microSDHC, microSDXC

Display: 5.5 in, IN, 720 x 1280 pixels, 24 bit

Battery: 2500 mAh, Li-Polymer (polymer lithium ion)

Operating Sitema: Android 6.0 Marshmallow

Camera: 3264 x 2448 pixels, 1920 x 1080 pixels, 30 fps

SIM card: Micro-SIM

Wi-Fi: b, g, n, Wi-Fi Hotspot

USB: 2.0, Micro USB

Bluetooth: 4.0

Location / Navigation: GPS, A-GPS

Step 2 Back case

Using a plastic opening tool, we remove the back cover.

Step 3 Battery

We extract the battery.

Step 4 Cards

We extract all the cards that are in the phone.

Step 5 Intermediate housing

We remove the 14 Phillips screws (PH # 00) and with a plastic opening tool, we uncouple all the edges of the intermediate casing.

Step 6 Rear camera and headset

We removed the back camera and the headset.

Step 7 Components

We disconnect all the components that are connected to the motherboard.

Step 8 Motherboard

Unscrew the 2 Phillips screws (PH # 00) that hold the motherboard and remove it.

Step 9

Finally, we disconnect the coaxial cable and desoldamos the flex of side buttons to place it on the new motherboard.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial