Wiko Robby - Interconnection Flex

Guide with all the necessary steps so that you can change the interconnection flex of Wiko Robby yourself

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Specifications

Dimensions: 79.1 x 155 x 10 mm

Weight : 185 g

SoC: Mediatek MT6580

Processor: ARM Cortex-47, 1300 MHz, Number of cores: 4

Graphic processor: ARM Mali-400 MP1, Number of cores: 1

RAM: 1 GB

Internal memory: 16 GB

Memory cards: microSD, microSDHC, microSDXC

Display: 5.5 in, IN, 720 x 1280 pixels, 24 bit

Battery: 2500 mAh, Li-Polymer (polymer lithium ion)

Operating Sitema: Android 6.0 Marshmallow

Camera: 3264 x 2448 pixels, 1920 x 1080 pixels, 30 fps

SIM card: Micro-SIM

Wi-Fi: b, g, n, Wi-Fi Hotspot

USB: 2.0, Micro USB

Bluetooth: 4.0

Location / Navigation: GPS, A-GPS

Step 2 Back case

Using a plastic opening tool, we remove the back cover.

Step 3 Battery

We extract the battery.

Step 4 Cards

We extract all the cards that are in the phone.

Step 5 Intermediate housing

We remove the 14 Phillips screws (PH # 00) and with a plastic opening tool, we uncouple all the edges of the intermediate casing.

Step 6 Rear camera and headset

We removed the back camera and the headset.

Step 7 Components

We disconnect all the components that are connected to the motherboard.

Step 8 Motherboard

Unscrew the 2 Phillips screws (PH # 00) that hold the motherboard and remove it.

Step 9 Interconnection Flex

We take off the sticker, disconnect the flex from the auxiliary plate, and with the help of an opening tool, we take off the flex that we are going to replace.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial