To begin we must apply heat to all the edges of the casing, and then take off using a tool fine enough.
Step 2 Covers
We extract the 3 Phillips screws (PH # 00) that hold the two covers that we removed in the photographs.
Step 3 Armor
Disconnect the battery, and under the flex there is a screw that holds the shield that is on the camera, remove the Phillips screw (PH # 00) and we can unhook the shield.
Step 4 Lower housing with vibrator
Remove the four phillips screws (PH # 00) that hold the housing, and with the help of a flat tool we will disengage it.
Step 5 Cameras
We disconnect and remove the cameras.
Step 6 Components
We disconnect everything that is connected to the motherboard.
Step 7 Motherboard
We remove the tray from the cards, remove the Phillips screw (PH # 00) that holds the motherboard, disconnect the flex from the screen and we can remove the motherboard.
Step 8 Speaker with antenna
We remove the Phillips screw (PH # 00) and unhook the speaker with antenna.
Step 9 Speaker
Unhook the coaxial cable, and take off the plate that we are going to replace with the help of a flat tool.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.