Sony Xperia T3 (Style) - Antenna coaxial cable

Guide with all the necessary steps so that you can change the coaxial antenna cable of the Sony Xperia T3 (Style) yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Sony Xperia T3 (Style)

Specifications :
OS: Android 4.4.2 KitKat
Screen: 5.3-inch IPS LCD with Triluminos display and Mobile BRAVIA Engine 2
Resolution HD 720 x 1280 pixels (277 ppi)
SoC: Qualcomm Snapdragon 400 MSM8928
CPU: 4 ARM Cortex-A7 cores at 1.4 GHz
GPU: Adreno 305
RAM: 1 GB
Storage: 8 GB internal expandable via microSD cards up to 32 GB
Chambers: Rear 8 megapixels with LED flash, and front 1.1 megapixels
Networks: 2G GPRS, EDGE; 3G HSUPA, HSDPA; 4G LTE Cat.4
Connectivity: GPS with A-GPS and GLONASS, Wi-Fi, Wi-Fi Direct, DLNA, Bluetooth 4.0, NFC, Micro-USB 2.0, FM Radio, 3.5 mm jack
Battery: 2500 mAh
Dimensions: 150 x 77 x 7 mm
Weight: 150 grams

Before starting make sure that the mobile is off.

Step 2 Opening

Remove the microSD and SIM cards

We will take advantage of the opening to start disassembling the back cover.

Step 3

Use the special metal spatula for mobile phones.

Release the plastic tabs located around the contour of the phone.

Step 4

Do not damage or bend the 2 metal contacts located at the bottom and top respectively.

Step 5 Lower module (antenna and speaker)

Remove the 6 Torx screws indicated in the image.

Separate the lower antenna and speaker module.

Step 6 Antenna coaxial cable

Peel off the right part of the antenna flex, where the microphone is located, to pass the coaxial cable.

Disconnect the lower end of the coaxial cable.

Step 7

Finally, disconnect the upper end and gently pull the cable to remove it.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial