We apply heat to the back casing, and with the help of one or more barbs, we remove all the edges of the casing.

Remove the 16 Phillips screws (PH # 00) that hold the antenna modules.

We disconnect and take off the battery, taking care not to damage it too much.

Unhook the lower antenna module with loudspeaker.

We disconnect the components of the motherboard.

We disconnect the flex from the screen and extract the tray from the cards.

We extract the Phillips screws (PH # 00) that hold the motherboard and we can remove it.

Remove the 4 Phillips screws (PH # 00), disconnect and remove the audio connector and detach the auxiliary plate.

We take off the broken vibrator.