Dimensions: 71 x 143 x 7.9 mm

Weight: 138 g

SoC: Qualcomm Snapdragon 410 MSM8916

Processor: ARM Cortex-A53, 1200 MHz Number of cores: 4

Graphic processor: Qualcomm Adreno 306, 400 MHz

RAM: 1.5 GB, 533 MHz

Internal memory: 16 GB

Memory cards: microSD, microSDHC, microSDXC

Display: 5 in, Super AMOLED, 720 x 1280 pixels, 24 bit

Battery: 2600 mAh, Li-ion (lithium ion)

Operating system: Android 5.1.1 Lollipop

Camera: 2576 x 1932 pixels, 1280 x 720 pixels, 30 fps

SIM card: Micro-SIM

Wi-Fi: b, g, n, Wi-Fi Hotspot, Wi-Fi Direct

USB: 2.0, Micro USB

Bluetooth: 4.1

Location / Navigation: GPS, A-GPS

We remove the back cover with the help of a plastic opening tool.

We remove the battery.

We extract all the cards that are in the phone.

Remove the 10 Phillips screws (PH # 00).

We apply a little heat to the front of the intermediate casing, and introduce a plastic opening tool and we will take off the entire edge of the casing.

Remove the components of the base plate to avoid unnecessary damage, for this we will use a plastic opening tool.

We disconnect the flex from the screen and the flex from the front buttons and proceed to remove the motherboard.

We apply heat to the screen, and then we introduce a spike in a corner to make a little leverage, and we introduce very little by little an opening card and take off the edges of the screen, if necessary, place more spikes so that the glue do not hit again.