Before starting make sure that the mobile is off.

Remove the back cover with the opening tool, thus avoiding scratches in the housing.

Finally remove the battery by pulling on the top.

Remove the microSD card.

Remove the SIM card.

Remove the sticker shown in the photo. We will use the hole that is covering to pull the plastic lid.

Remove the plastic cover and disconnect the data flex from the display.

In this model, the screen should be detached for almost any repair, except battery change. This makes it not as easy to repair as other models. Samsung before you molaba!

We will use the Hot Glass *, or the hot air gun to heat the glass and take it off easily.

* The Hot Glass is a heating blanket, suitable for microwaves, that we apply directly on the screen.

Separate ligremante the plastic frame by all the contour with the prong.

Peel off the bottom with the prong and slightly separate the barb from behind the LCD, and not just from the glass.

Scroll the sides with the prong to detach the screen.

Finally, separate the upper part, in which the data flex is located.

Remove the 4 Phillips screws shown in the photo.

Remove the module with the " Home " key.

Remove the Phillips screw that was hidden behind the "Home" key .

With the flat part of the opening tool, pry up without force to remove the plate upwards.

Separate the base plate, for it use more skill than force.

Peel off the flex with the connection terminals of the handset on the inside of the housing.

Finally, detach the handset on the outside of the case.