With a SIM removal tool we remove the SIM tray.

We apply heat to the screen, for two minutes at 80 degrees.

We introduce a metal prong between the central housing and the screen. Once introduced, we exchange it with a plastic pick to avoid scratching the frame. We will do all the contour taking off the screen with great care.

Unplug the middle housing. We disconnect the flex from the screen and remove it with the intermediate casing.

Unscrew the Torx screws (T4) that hold the speaker.

We take off the proximity sensor of the atrial speaker and remove it.

Unscrew the Torx screws (T4) that hold the antennas and remove them ..

Disconnect the flex from the side button, remove the plastic sheet that covers the flex of the battery and disconnect it.

We unhook the rear camera, disconnect it and remove it.

We disconnected the proximity sensor and removed it.

We disconnect and remove the front camera.