With a SIM removal tool we remove the trays from the SIM and SD cards.

We must remove the back cover, for this we must apply heat with a thermal mat for a few minutes, then with the help of an opening tool thin enough, we separate the case a little and introduce some plastic spikes to remove it without damaging it.

With the help of a fine plastic tool we disconnect the fingerprint reader.

We extract the 12 Phillips screws (PH # 00) that hold the intermediate casing, and using a flat plastic tool we unhook it and remove it.

We disconnect the battery to work more safely.

We extract the 5 Phillips screws (PH # 00) that hold the speaker and with the help of a fine plastic tool we remove the speaker.

In order to remove the motherboard we will disconnect the flex from the screen, from the rear cameras, front camera and earphone. We remove the components.

To remove the motherboard we are going to unhook it from the tabs that hold it with a fine plastic tool and extract it.

With a fine tool we remove the buttons from the chassis and remove the keys.

To remove the battery we use a plastic tool, we pry it carefully and we can add a little alcohol to make it easier to take it off.

With a fine tool we remove the button from the chassis and remove the power button.