Remove the back cover, if necessary use a plastic opening tool.

Then remove the battery from the phone.

Remove all cards that are in the phone.

Remove the 11 Phillips screws (PH # 00) that hold the middle housing.

With the help of a plastic tool unhook the intermediate casing, carefully as it is quite well anchored.

Disconnect all the components of the motherboard, to disconnect the cameras and to lift the tab of the display connector, we will use a plastic tool, but to remove the flex from the connector we will use a pair of tweezers.

With a metal prong take off the flex of side buttons, and also remove the sticker to take off the interconnection flex.

We disconnected the coaxial cable, the vibrator and the interconnection flex.

We will remove the two Phillips screws (PH # 00), lift the base plate and disconnect the coaxial cable from the back.

Finally, with a metal spike we will remove the handset to replace.