First we must apply heat to the back cover, and using a tool with suction cups and a very thin tool we will remove the back cover taking care not to damage it.

We extract the nine Phillips screws (PH # 00) that hold the intermediate housing with the NFC antenna, and we will unhook it with the help of a plastic tool with the flat tip.

We disconnected the battery to avoid possible damage.

We remove the tray from the cards.

We disconnect the flexes from the rear cameras and remove them.

We disconnect and remove the front camera.

We disconnect the components that are connected to the base plate, and with the help of a flat tool we can lift the base plate.

Using a tool that is fine enough, we will remove the handset that we have to replace.