First we must apply heat to the back cover, and using a tool with suction cups and a very thin tool we will remove the back cover taking care not to damage it.

We extract the nine Phillips screws (PH # 00) that hold the intermediate housing with the NFC antenna, and we will unhook it with the help of a plastic tool with the flat tip.

We disconnected the battery to avoid possible damage.

Remove the four Phillips screws (PH # 00) that hold the lower housing, and unhook it with a flat-tipped tool.

We extract the three Phillips screws (PH # 00) that hold the loudspeaker module, disconnect the coaxial cable and the other components that are connected in the auxiliary plate, and with the help of a flat tool we will remove the damaged loudspeaker.