Remove the battery cover using a plastic opening tool, it will avoid scratching or damaging the equipment.
Step 2
Step 3 Battery
Remove the battery by pulling on the top.
Step 4 SIM card
Remove the SIM card by pushing it out with your finger.
Step 5 Micro SD card
Remove the micro SD card by pulling it.
Step 6 Intermediate housing
The casing is held by:
8 Torx screws
1 Phillips screw
Step 7
Separate the casing little by little, using the opening tool.
Step 8 Rear camera
Unplug the camera and pull it gently to remove it.
Step 9 Motherboard.
Disconnect the data cable from the display and the flex from the side buttons.
Step 10
Separate the housing plate bit by bit with the opening tool. It is glued with double-sided tape, you will have to take it off with lever movements.
Step 11
Once detached from the chassis, separate the base plate.
Step 12 Front camera
Unplug the camera by pulling it gently.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.