We apply heat for one minute at 80 degrees. We introduce a spike and perform all the contour taking off the back cover taking care not to break it.
Step 3 Intercarcasa
Unscrew the Philips screws (PH # 00) to release the intermediate housing.
With a prong we perform the contour to detach the intermediate casing.
We disconnect the flex from the fingerprint reader on the motherboard.
Step 4 Components
We disconnect the flex from the screen. We disconnected the flex from the battery. We disconnect the interflex and finally disconnect the flex from the proximity sensor.
Step 5 Cameras
We disconnect and remove the front and rear cameras.
Step 6 Motherboard
We disconnect the coaxial cable.
We remove the motherboard.
Step 7 Side push buttons
We take off the flex of the lateral push button and remove it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.