With a SIM removal tool we remove the tray.

We apply heat for one minute at 80 degrees. We introduce a spike and perform all the contour taking off the back cover taking care not to break it.

Unscrew the Philips screws (PH # 00) to release the intermediate housing.

With a prong we perform the contour to detach the intermediate casing.

We disconnect the flex from the fingerprint reader on the motherboard.

We disconnect the flex from the battery of the motherboard.

Take off the battery carefully, until you remove it,

We disconnect the flex from the screen of the motherboard and take it off the chassis.

We apply heat (80º) for one minute to the screen to soften the glue.

We introduce a spike between the screen and the frame, we carefully make the outline until it is completely detached.