We start by removing the back cover. To do this we introduce an opening tool between it and the housing. Sliding it around the contour will disengage it.
Step 2 Remove battery
We disengage the battery by levering through the hole it brings for this purpose.
Step 3 Remove speaker module
Now we remove the six Phillips screws (PH # 00) that hold the module and we unlock it.
Be careful as the speaker is attached to the auxiliary plate and the module to break when dismantling.
Step 4 Remove auxiliary board
We disconnected the coaxial cable, the digitizer flex and the interconnection flex. Now we can take it off the chassis.
Step 5 Auxiliary plate
All you have to do is desolder the vibrator.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.