We will start by heating the screen at about 60 ° C for about a minute to soften the adhesive.
With the hot screen, we will introduce an opening tool between it and the frame to detach it.
Step 2 Separate screen
Before separating the screen we will have to take off the flex of the home button and so we can move it to have access to the screws that hold the flex of it.
After removing the shield, we can disconnect it.
Step 3 Remove chassis
To remove the chassis, first remove the flex from the home button. We will also remove the screws, the SIM / SD tray and the adhesives.
Step 4 Remove back cover
In this step we will heat the back cover of the phone to soften the adhesive and thus remove it more easily.
Step 5 Intermediate housing
Now, to remove the back shell, first let go of the top and bottom. Then we will have to release all the lateral notches as shown in the fourth and fifth images.
Step 6 Removing the motherboard
To remove the base plate, first cut the thermal adhesive that covers this and the battery. Remove the screw that holds the chassis, disconnect the components and desencajamos.
Step 7 Side push buttons
It only remains to disconnect the flex from side buttons on the motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.