Elephone S3 - Auxiliary plate

Guide with all the necessary steps so that you can change the auxiliary plate of the Elephone S3 yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 characteristics

Dimensions : 70.5 x 142 x 8.3 mm

Weight : 167 g

SoC : MediaTek MT6753

Processor : ARM Cortex-A53, 1300 MHz, Number of cores : 8

Graphics processor : ARM Mali-T720 MP3, 450 MHz, Number of cores : 3

RAM memory : 3 GB, 800 MHz

Internal memory : 16 GB

Memory cards : microSD, microSDHC, microSDXC

Display : 5.2 in, IPS, 1080 x 1920 pixels, 24 bit

Battery : 2100 mAh, Li-Polymer (polymer lithium ion)

Operating system : Android 6.0 Marshmallow

Camera : 4160 x 3120 pixels, 1280 x 720 pixels, 30 fps

SIM card : Micro-SIM, Nano-SIM / microSD

Wi-Fi : b, g, n, Hotspot

USB : 2.0, Micro USB

Bluetooth : 4.0

Location / Navigation : GPS, A-GPS, GLONASS

Step 2 Fullscreen

With the help of a very thin prong we take off the top, bottom and right side of the screen, lift the screen on the right side and disconnect the flex.

Step 3 Cards

We extract the cards from the phone.

Step 4 Back case

Remove the 12 Phillips screws (PH # 00) and insert a fine prong between the intermediate housing and the rear housing.

Step 5 Speaker

We removed the speaker.

Step 6 Auxiliary plate

We disconnected the coaxial and the interconnection flex, took off the vibrator and removed the auxiliary plate.

Step 7 Vibrator

Desoldamos the vibrator.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial