To begin with, we remove the tray from the cards with the help of the extraction tool.

With a thin enough tool we will unhook all the edges of the back cover, then we must remove the three Phillips screws (PH # 00) that holds the shield that protects the connectors, and disconnect the fingerprint reader.

We disconnect the flex with the side buttons.

It would not be necessary to take them off.

We disconnect the flex from the screen, and the interconnection flex.

We extract the five Phillips screws (PH # 00) that hold the upper antenna and we can unhook it.

We disconnect the flex from the digitizer, and the coaxial cable.

Once all the components that were connected to the motherboard have been disconnected, we will remove the three Phillips screws (PH # 00) that hold the motherboard and we can remove it.

With the help of a fine metal spike, we took off the broken handset that we are going to replace.