Specifications

Physical dimensions: 148.2 x 72.8 x 10.3 mm 145 grams

Before you start, make sure your mobile is turned off.

Remove the back cover with a plastic opening tool, thus avoiding scratches on the housing.

Remove the SIM and SD cards.

Remove the 13 Phillips screws that secure the middle housing.

Note that one of them is covered with a seal of guarantee with the word " Seal ".

Remove the intermediate housing, releasing the plastic hooks located around the contour.

Remove the adhesive covering the connector on the motherboard.

Unplug the flex from the SIM reader, by pulling the connector tab and gently pulling the flex.

Also undo the lower end of the flex.

Finally, take off the flex from the battery shield.