First of all we must remove the tray from the cards.
Step 2 Back case
Remove the two Torx screws (T3) that hold the back shell, and with the help of a tool we will unhook all the edges of the casing.
Step 3 Speaker module with vibrator
We extract the seven Phillips screws (PH # 00) that hold the module and with a flat tool we will unhook it.
Step 4 Shields
We remove the six Phillips screws (PH # 00), remove the bulge that is above the flex connector of the screen and the battery, disconnect it, and also remove the upper case.
Step 5 Components
We disconnect all the components that are connected to the motherboard.
Step 6 Motherboard
Remove the two Phillips screws (PH # 00) that hold the base plate to the chassis, and we can lift it to where the battery is located to disconnect the interconnection flex, which is connected to the back of the motherboard.
Step 7 Headset and side buttons
Take off the handset and the side buttons.
Step 8 Interconnection and battery flex
We disconnected the interconnection flex and took off the battery.
Step 9 Full screen with chassis
All we have to do is disconnect the fingerprint reader, the coaxial cable, remove the auxiliary plate and the fingerprint reader.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.