We start by removing the screen. To do this, first remove the two lower screws Pentalobe 0.8 (TS1). Then we will heat the screen to soften the adhesive which we will remove by sliding a flat tool around the contour of it.

We remove the seven Phillips screws (PH # 000) that hold the shields and then disconnect the flexes from the screen.

We take out the nine Phillips screws (PH # 000) and the indicated standoff screw to be able to remove the shields and the upper antenna. Then we will extract the SIM tray.

In this step we disconnect the flex from the motherboard.

Now we remove the screws that hold the antenna contacts and the one under the adhesive to disengage the base plate.

In this step, we remove the battery, for this we will pull the tabs to remove the adhesive and be able to take it off.

Then we will remove the screws of the push-button flex.

Once the screws are removed, it is only necessary to disengage the push-buttons and remove the flex from the chassis.